Led tail lights on a 3g lude!

(Thanks to 1991 JDM SI VTEC)

Only registered users can see links on this forum! Register or Login on forum!

Thanks to 1991 JDM SI VTEC for finding it.

Tinting Lexarse Lights

(by Nucleustylz lude)

I was intending to detango my originals but after looking on cardomain I found a guy who had modified the lexus lights. So I thought I'd see what it looks like:

First stage, with a bit of a give away can of tint spray!





Masked up and sprayed





And finally the finished product, what an improvement!





On the car:

Tail Light Conversion (De-Tango) for Honda Prelude 4th Gen

(Thanks to 1991 JDM SI VTEC for finding it, and thanks to 92lude.)

Only registered users can see links on this forum! Register or Login on forum!

WARNING - been asked to add a warning not to set the oven too high -

Only registered users can see links on this forum! Register or Login on forum!

Sidelight Removal

(thanks to Taffy Lude, moved from Chassis how to thread )

4th Gen Prelude - UKDM Sidelight

1. Open the bonnet, and look for the small hole above the headlight.



2. This is the hole your after. Using a Phillips screwdriver, remove the sidelight securing screw from inside the hole (be careful not to drop it).




3. Wiggle the sidelight unit about to try and free it from it's mounting. You may need to use a flatbladed screwdriver to GENTLY prise it free.



4. Once the unit is loose, pull it FORWARDS towards the front of the car.



5. There are two plastic pins at the rear of the light unit which help locate it in place. Once these are clear of their holes, pull the unit SIDEWAYS away from the car. You may need to jiggle the plastic arm that the securing screw went into.



6. You should now be able to take the sidelight out of the vehicle.



7. Simply twist the bulb holder anti-clockwise to remove it from the sidelight. The bulb is a 501 type wedge bulb which just pulls out.





8. Re-installation is simply the reverse of the above.

Total time is about 4 minutes each side.


4th Gen Prelude - JDM Sidelight

The JDM headlights are one-piece, and have the sidelights incorporated into them. The bulbholders usually have a plastic stalk fixed to them, which enables them to be removed easily from the engine bay side without having to remove anything else.

'Prelude' - Hight Level Brake Light

RattyMcClelland

Only registered users can see links on this forum! Register or Login on forum!

Colour Coding 5th Gen Front Lights

(Thanks to keithb)

Only registered users can see links on this forum! Register or Login on forum!

Modifying LHD projector lights for RHD cars

(Thanks to Stan/Prelude Au) - click on picture below

Only registered users can see links on this forum! Register or Login on forum!